Brand NEW, heat-treated forged Mustang II steel spindle that retains the exact OEM geometry of the 74-78 Mustang II or 74-80 Pinto spindle. This is the ONLY aftermarket spindle allowed by IMCA. Work great with our 10" HD Hybrid Rotors as well as with stock rotors, bearings, calipers, ect. Stock 7 5/8" height. 10.5 degree pin inclination. Easy to install.
•From lower ball joint hole to steering hole is 5"
•For the ball joint holes: Inside measurement is 5-7/8" and outside is 7-5/8"
Specify Right or Left